Controlled by Micom single chip, It will emit a sound and cut the load of heater when the actually temperature over 35℃ or keep heating under 20℃ by flash symbols.

Once the sensor wire is cut or short-circuited, it will emit a sound and cut the load of heater.

Failure status is easy to tell by flashing symbols and emitting sounds.

Alarm controlled by Micom chip, yet it won't emit any sound while resetting the temperature or initial lower temperature.

It will emit a sound of alarm and cut the load of heater, if there is ±3℃error happened between actually temperature and setting temperature.

It will emit a sound of alarm and cut the load of heater if the actually temperature is over 35℃ or under 20℃.

when the sensor cable is cut or short-circuited, it will emit a sound of alarm and cut the load of heater.

Failure status is easy to tell by flashing symbols and emitting sounds.

Max Wattage load 1200W.

Alarm controlled by Micom chip, yet it won't emit any sound while resetting the temperature or initial lower temperature.

It will emit a sound of alarm and cut the load of heater, if there is ±3℃error happened between actually temperature and setting temperature.

It will emit a sound of alarm and cut the load of heater if the actually temperature is over 35℃ or under 20℃.

when the sensor cable is cut or short-circuited, it will emit a sound of alarm and cut the load of heate.

Failure status is easy to tell by flashing symbols and emitting sounds.

Max Wattage load 1200W.