照明系列
照明系列
Index > Products > Aquarium > Lighting Series > CS095A~97A Series
CS095A Series:4 Feet
CS096A Series:3 Feet
CS097A Series:2 Feet
︳ Feature
The latest technology:Close to natural solar spectrum by 3W LED with 4-chips multi-spectrum.
The safest design:IPX7 waterproof, lighting accidentally immerse in water at a depth of 1 meter for 30 minutes and then the
lighting should pass the voltage withstanding test.
The most durable:Play a good cooling effect to prevent luminous decay of high power LED by a good solid heatsink.
The most effective:5 dimming illumination and timing control can grow plants with thick stems and large leaf.
The most affordable:One Johnlen high-power LED lights can reach two low-power LED lights.
︳ Technical Specifications
︳ How to Install
Bracket
Screw
Main body
Male & female connected cables
Switching power supply
Controller
Drip loop
The lighting above the water level at least 15mm
The thicknesses of tank allows 4~12mm
︳ Important notes
Disconnect supply before opening the lighting for maintenance.
Plug in the power cord using a drip loop to prevent water from traveling along the cord and coming into contact with the receptacle.
Do not stare at LED Bulbs.
︳ Emergency Handing
Please cut off the power source and unplug the electric wire for safety, if any situations of danger or urgency happened.
︳ Limited Warranty
Under normal use and service, all appliances carry 12 months warranty from the date of purchase on parts and labor against manufacturing defects. Please return the unit if deemed defective to your local dealer for repair or replacement.
The warranty is limited to this appliance only, Not responsible for consequential loss or damage.
︳Growth Situation
7000K + 4000 K in a multi-spectral LED aquarium lights at 60cm tank
The first day
The third week
The second week
The third week
The fourth week
The fifth week
The sixth week
The seventh week
︳Image Display
Growth Situation
7000K + 4000 K in a multi-spectral LED aquarium lights at 60 cm tank.
Dimmable Multi-Spectrum Led Aquarium Light
︳ ACCESSORIES
CS085-1-1
The movable stainless bracket
How to install
1.Guide the right bracket
into the both grooves of
fin.
2.Adjust the proper
position by moving back
and forth.
3.Follow the steps 1~2 to the left bracket,
completed bracket sets and then fix the brackets
onto the tank.
CS085-2
The Plastic Bracket
How to install
1.Fix the brackets at the left and right sides of tank.
2.Put the LED lighting onto the brackets.
Bracket.
Screw.
Main body.
CS085-2-2
The hook kit
CS085-3
Spring clips
How to install
1.Guide the spring clip into both sides
of groove of the fin.
2.Use two screws to screw the fixer to
the plane of the object.
3.Push two latchs which are on
different position and then adjust
length of the rope.
4.Put the hook to hook the spring clip.
5.Follow the steps 1~4 to the other
side, completed the installation of
the hook kit and then hook the
lighting onto the tank.
CS001-1
The Plastic Bracket
How to install
1.Fix the brackets at the left and right sides of tank.
2.Put the LED lighting onto the brackets.
1.Plastic Bracket.
2.Plastic Screw.
3.Main body.
CS001-2
The Acrylic Bracket
How to install
1.Fix the brackets at the left and right sides of tank.
2.Put the LED lighting onto the brackets.
1.Acrylic Bracket.
2.Plastic Screw.
3.Main body.